Mobile Phone Slight Drop Tester Is Suitable For Repeated Drop Tests On Small Electronic Consumer Products Such As Mobile Phones, Telephone Receivers

I. Usage:

This machine is suitable for repeated drop tests on small electronic consumer products such as mobile phones, telephone receivers, walkie-talkies, MP3 players, CDS, and electronic dictionaries
Ii. Principle of Action
The motor drives the upper fixture (air finger) to descend and hold the phone, then rise. When the air finger is released, the phone starts to fall freely. At this point, the double-action cylinder extends and pulls the phone to the position that the upper fixture can hold. The motor drives the upper fixture (air finger) to descend and hold the phone, then rise. When the air finger is released, the phone starts to fall freely. This process repeats until the set number of times is reached.
Iii. Features: It can be set to stop automatically for the number of times
Drop surface material: Aluminum, thickness 12mm. Reset the baffle at the fall point.
Prompt function: It can set the number of key presses to a fixed value and automatically stop the test.
This machine adopts Shinano motor from Japan as the driving source for lifting and dropping the mobile phone, ensuring durable use. It can repeatedly drop products such as mobile phones to test their impact resistance when dropped from a certain height.
Due to the adoption of pneumatic components and dedicated control methods, the testing speed and consistency have been greatly enhanced. The action program control is carried out by using a display and control LCD touch screen and a PLC programmable controller. Count simultaneously. The test will automatically stop when the set number of times is reached
Iv. Technical Parameters
1. Simultaneous drops of mobile phones: 2 units
2. Allowable specimen weight: 2kg(maximum)
3. Drop height: 60-200mm
4, test speed range: 6 ~ 20 times /min5, PLC controller and touch screen: 1 set6. Machine dimensions: W550*H750*D650mm
7. Machine weight: Approximately 40kg
8. Air source: ≥0.5Mpa
9. Power supply: AC 220V or specified
Note: The electrical part of the production is integrated with the main body
V. Main Configuration
1. Touch screen: 1, PLC: 1
2. Ascending and descending motors: 1 set (SMC)
3. Vacuum suction cup: 1 (SMC)
4. Vacuum generator: 1 (SMC)

mobile phone drop tester

electronic drop test equipment

small product drop tester

Mobile Phone Slight Drop Tester Is Suitable For Repeated Drop Tests On Small Electronic Consumer Products Such As Mobile Phones, Telephone Receivers Images